DIDIDEDE, EV Bikes Are Here. Buy at dididede.com.
Industry-News
AGV and AMR Battery Packs: Sizing for Continuous Operation
Why AGV battery packs are sized against the charging window rather than a shift-length runtime, and what discharge rating, SOC accuracy and mounting position each decide.
Battery Sample Approval and Incoming Inspection: A Practical Checklist
Most battery disputes start at the sample stage, not in production. This covers how to lock the specification before a sample is built, what to test when it arrives, how to sample a production shipment, which documents to match against the goods, and when to reject rather than accept.
Battery Pack Specification Sheet: How to Read One Before You Buy
A spec sheet is not a datasheet, it is a promise. This guide walks through every line — nominal voltage, capacity and energy, continuous and peak current, cycle life conditions, temperature windows, IP rating, connectors and certifications — and shows which omissions matter most.
Lithium Battery Recycling and End-of-Life Compliance: What Importers Must Do
End-of-life rules now decide whether a battery can be sold in the EU, UK and US. This guide covers who the law treats as the producer, the EU 2023/1542 timeline, labels and battery passports, how waste batteries must be shipped, and the documents to request from your supplier.
Lithium Battery Storage and Charging Safety: A Practical Guide for Importers and Warehouses
What importers need in place before the first container arrives: where to store lithium batteries, what state of charge to hold them at, how to run a charging area, what actually works on a lithium fire, and how to handle damaged packs.
Lithium Battery Packaging and Marking for Export: UN Boxes, Class 9 Labels and State of Charge
A practical guide to export packaging and marking for lithium batteries — what the UN box code means, which marks go on which shipment, when 30 percent state of charge applies, and how to avoid a rejection at the airport.
How to Size a Battery Pack: From Runtime Requirement to Amp-Hours
A four-step method for sizing a lithium battery pack from a real duty cycle — plus the margins that turn a calculation on paper into a pack that still performs after two years.
BMS Specifications Explained: How to Read a Battery Management System Datasheet
A practical walk-through of the BMS numbers that decide whether a battery pack lasts three years or six: current ratings, balancing, protection thresholds, SOC estimation and standby draw.
Lithium Cell Capacity Grading Report: How to Read One Before You Buy
A cell grading report is the only real evidence of what you are buying. What the columns mean, which spread is acceptable, how fakes are made, and how to write acceptance terms that hold.
How to Audit a Chinese Battery Factory: The On-Site Checklist
A practical battery factory audit checklist for importers: which documents to request before you fly, what to inspect on the production floor, and the warning signs that tell you to walk away.
Lead-Acid to Lithium Conversion: What the Payback Really Looks Like
A fleet buyer's guide to lead-acid to lithium conversion: the numbers that decide payback, where conversion pays back fastest, and what the kit actually needs.
48V vs 72V Batteries: How to Choose the Right Voltage
48V vs 72V battery systems explained for fleet buyers: what voltage changes, why capacity is set by the journey, and how to match pack, controller and motor.