1. Solid-State Technology Overview
1.1 Comparison of Three Solid-State Battery Categories
| Route |
Liquid Electrolyte Share |
Ion Conduction Medium |
Status |
| Liquid battery (current mainstream) |
100% liquid |
Liquid electrolyte |
Mainstream; energy density 200–300 Wh/kg |
| Semi-solid battery |
5–10% liquid |
Gel / partially solid |
2026 first year of mass production; energy density 300–400 Wh/kg |
| All-solid-state battery |
0% liquid |
Pure solid electrolyte |
2027–2030 mass production; energy density 400–500 Wh/kg |
1.2 Semi-Solid: From Lab to Mass Production
| Advantages |
Challenges |
| ✅ Energy density +20–30% |
⚠️ Cost still 30–50% higher than liquid |
| ✅ Significant safety improvement (resistant to thermal runaway) |
⚠️ Cycle life slightly lower (1500–2500 cycles) |
| ✅ Better fast-charging performance (4C–6C) |
⚠️ Manufacturing process must be adjusted |
| ✅ Compatible with existing production lines (90% compatible) |
⚠️ High patent barriers |
1.3 All-Solid-State: Three Main Routes Coexist
| Route |
Representative Enterprises |
Advantages |
Challenges |
| Sulfide |
Toyota / Samsung SDI / CATL |
Highest ionic conductivity (10⁻³–10⁻² S/cm) |
Air-sensitive; high production cost |
| Oxide |
QuantumScape / ProLogium |
Most stable; air-stable |
Lower ionic conductivity; hard to process |
| Polymer |
Bolloré / Blue Solutions |
Flexible; easy to process |
Low room-temperature conductivity; requires heating |
Current mainstream: CATL / BYD / Samsung push sulfide route; QuantumScape / ProLogium push oxide route.
2. Key Enterprise Progress
2.1 Head-Enterprise Mass-Production Timetable
| Enterprise |
Semi-Solid Mass Production |
All-Solid-State Mass Production |
Notes |
| CATL |
2024 already in production (Qilin Condensed-State) |
2027 small batch |
Sulfide route |
| BYD |
2026 Q3 Blade 2nd Gen |
2028 small batch |
Sulfide route |
| SAIC + Qingtao |
2024 already in production (IM L7) |
2027 small batch |
Oxide route |
| GAC + Ganfeng |
2025 already in production (Aion LX Plus) |
2028 trial assembly |
Oxide route |
| NIO + Weilan |
2024 already in production (ET7 150 kWh pack) |
2028–2030 |
Oxide route |
| ProLogium |
2025 mass production |
2027 large scale |
Oxide exclusive supplier |
| Honda |
2026 trial assembly |
2028–2030 |
Sulfide route |
| Toyota |
– |
2027–2028 small batch |
Sulfide route; 1300+ patents |
| Samsung SDI |
2025 trial assembly |
2027 mass production |
Sulfide route |
| Solid Power |
– |
2028 trial assembly |
Sulfide route |
| QuantumScape |
– |
2027 trial assembly |
Oxide route (Volkswagen-invested) |
2.2 2026 Vehicle Installation List (partial)
| Vehicle Model |
Battery Supplier |
Semi-Solid Type |
Range / Energy Density |
| IM L7 |
Qingtao |
Oxide |
1000+ km / 368 Wh/kg |
| NIO ET7 150 kWh |
Weilan |
Oxide |
1000+ km / 360 Wh/kg |
| GAC Aion LX Plus |
Ganfeng |
Oxide |
1000+ km / 350 Wh/kg |
| Lantu FREE |
Farasis |
Semi-solid |
730 km / 320 Wh/kg |
| BYD Han EV (Blade 2nd Gen) |
BYD |
Semi-solid |
700+ km / 320 Wh/kg |
| Zeekr 001 |
CATL Condensed-State |
– |
1000+ km / 350 Wh/kg |
| SERES Aito M9 |
CATL Condensed-State |
– |
1300+ km / 360 Wh/kg |
H1 2026 semi-solid battery installations ≈ 50K–80K vehicles; penetration rate approx. 0.5% (vs. pure electric passenger car H1 2026 sales of 3.5M+ vehicles).
3. Industry Chain Opportunity
3.1 Upstream Materials
| Material |
Status |
Opportunity |
| Lithium metal anode (lithium foil) |
Required for all-solid-state |
Top players: Ganfeng / Tianqi / HiNa |
| Sulfide electrolyte (Li₆PS₅Cl, etc.) |
All-solid-state core |
China started late; 2026–2028 ramp-up |
| Oxide electrolyte (LLZO / LATP) |
Common in semi-solid |
Already in production: Easpring / Xiamen Tungsten / BTR |
| Silicon-carbon anode |
Required for high energy density |
Mainstream: BTR / Shanshan / Putailai |
| High-nickel cathode (NCM811 / 9-series) |
Mainstream semi-solid |
Ronbay / Easpring / Zhenhua |
| Single-wall carbon nanotube (CNT) |
Conductive agent upgrade |
Cnano / Daoqin Technology |
3.2 Mid-Stream Cells / PACK
| Enterprise |
Type |
2026 H1 Capacity |
| CATL |
Semi-solid + all-solid-state |
~2 GWh |
| BYD |
Semi-solid (Blade 2) |
~3 GWh |
| Qingtao Energy |
Semi-solid + oxide |
~2 GWh |
| Weilan New Energy |
Semi-solid + oxide |
~1.5 GWh |
| Ganfeng LiEnergy |
Semi-solid |
~1 GWh |
| ProLogium |
Semi-solid |
~1 GWh |
3.3 Downstream Application Expansion
| Application |
Time Window |
Characteristics |
| High-end EV (¥500K+ vehicles) |
2024–2027 already ramping |
1000 km range selling point |
| eVTOL / low-altitude economy |
2027–2030 |
Energy density / safety dual driver |
| Energy storage (high-end) |
2028–2030 |
High safety + long life |
| Military / specialty |
Continuous |
Extremely high safety + extreme environments |
| Consumer electronics (high-end) |
Continuous |
Small size + safety |
4. Technical Difficulties and Industry Challenges
4.1 The Five Bottlenecks of All-Solid-State
- Lithium metal anode: Dendrite issue (needle-like lithium deposits form during lithium plating, piercing the electrolyte)
- Interface impedance: Solid electrolyte contacts electrodes with small area; low ion conduction efficiency
- Manufacturing process: Sulfide requires operation in dry rooms (dew point -40°C); high equipment cost
- Cost: Current all-solid-state battery cost ≈ 5–10x liquid battery
- Mass production: Lab single-cell → mass-production consistency challenge
4.2 Semi-Solid’s Transitional Role
Semi-solid is not the end state — it is the transition solution from liquid → all-solid-state:
- Compatible with existing production lines (low retrofit cost)
- Significant performance improvement (energy density + safety)
- Cost between liquid and all-solid-state
Judgment: Semi-solid will continue to dominate high-end EV / eVTOL markets from 2024–2030; gradually replaced by all-solid-state after 2030.
5. Recommendations for B2B Buyers
5.1 Buying / Installing Now
- ✅ 2024–2026 installed semi-solid batteries = already verified; use with confidence
- ✅ Already mass-produced models (IM / NIO / BYD / Zeekr) = mature after-sales system
5.2 Watch Industry-Chain Opportunities
| Timing |
Action |
| Now |
Watch oxide electrolyte (Qingtao / ProLogium / Easpring) capacity ramp |
| 2026 H2 – 2027 H1 |
Watch sulfide electrolyte domestic production line commissioning |
| 2027–2028 |
Watch lithium metal anode mass production (Ganfeng / Tianqi) |
| 2028–2030 |
Watch all-solid-state mass production + eVTOL application |
5.3 Pitfalls to Avoid
- ❌ Lab parameters ≠ mass-production parameters (energy density / cycle life often discounted)
- ❌ All-solid-state ≠ absolutely safe (lithium dendrites may still pierce)
- ❌ Semi-solid ≠ all-solid-state replacement (different performance ceiling)
6. Industry Resources
- GGII (Gaogong Lithium Battery Research Institute): Monthly solid-state battery installation data
- EVTank: Global solid-state battery capacity and price tracking
- China Automotive Power Battery Industry Innovation Alliance: Technology-route white paper
- dididede: Semi-solid / all-solid-state battery trade and PACK services (high-end EV / eVTOL / energy storage)
Related reading: LFP vs NMC vs Sodium-ion: 2026 Comparison · Lithium Cell Specifications Explained · DIDIDEDE Battery Cells