Lithium Battery Recycling Policy 2026: New Regulation One Month In

1. What the New Regulation Changes

1.1 “Cascading Utilization” Concept Formally Abolished

Before the new regulation, “cascading utilization” specifically referred to repurposing end-of-life batteries with SOH (State of Health) 70-80% into storage, low-speed EV, backup power, and other scenarios, and was once certified as a compliant business by the whitelist.

After the new regulation takes effect, all products manufactured using end-of-life power batteries — regardless of SOH — must meet the new national standard requirements and must be prominently labeled “Reused Product” on outer packaging. In other words, the legality of “cascading utilization” as an independent business path is canceled — it either becomes compliant “reuse” meeting the new national standards, or it exits the market.

1.2 Whitelist Major Reshuffle

In MIIT’s latest published “regeneration” whitelist, all 100 previously listed “cascading utilization” whitelist enterprises have been removed. Enterprises wishing to continue in the end-of-life battery processing business must reapply and pass the “regeneration” admission:

Business Type Before After
Regeneration (wet / fire / crushing for metal extraction) Already whitelisted Retained + admission threshold raised
Cascading utilization (re-pack) 100 whitelisted enterprises All removed
Simple recycling / resale Gray area Explicitly prohibited

1.3 7 Prohibited Application Categories

The new regulation explicitly lists prohibited scenarios for reused batteries:

# Prohibited Category Risk Reason
1 Electric bicycles Charging fire incidents frequent, SAMR key concern
2 Self-balancing vehicles / scooters Consumer group safety awareness weak, incident accountability difficult
3 Energy storage > 100kWh Large investment, severe failure consequences
4 Mobile power banks / chargers Personal carry, fire escape difficult
5 Toys / children’s products Highest safety standards, substandard cells strictly forbidden
6 Medical implanted devices Failure endangers life
7 Emergency evacuation indicators / fire equipment Failure consequence = lives

2. Impact on Industry Chain Stakeholders

2.1 Vehicle OEMs: Rising EPR Cost

The new regulation strengthens Extended Producer Responsibility (EPR): OEMs must not only cooperate with recycling at the sales stage, but also be responsible for the final destination of end-of-life batteries. Estimated per-vehicle recycling cost increase of ¥500-1,500 (per public estimates), ultimately passed to consumers or absorbed internally by automakers.

2.2 Power Battery Manufacturers: Tech Upgrade & Traceability Systems

Head battery manufacturers (CATL / BYD / CALB) had established complete Battery Passport systems before the new regulation — full lifecycle data for each cell is traceable. After the new regulation takes effect, this data becomes mandatory:

  • At factory: Chemistry / capacity / batch / production date
  • In use: Charge cycles / operating temperature / SOC range
  • At retirement: SOH / failure mode / dismantling evaluation

Small/mid battery manufacturers face dual pressure of traceability system construction costs + 6-month compliance transition period.

2.3 Storage Integrators: Cost Structure Changes

While MIIT has not explicitly prohibited reused batteries in storage systems below 100kWh, new national standard requirements significantly increase. Estimated 2026 H2 storage PACK cost will rise 5-8%:

Cost Item Change Impact
Cell procurement (new national standard) +8-12% Overall PACK cost up
Traceability system integration New one-time investment ¥500k-2M —
Testing & certification (national standard) New per-batch ¥50-150k —
Insurance +30% Risk model reassessment

2.4 Recycling Processors: Head Concentration Accelerates

The new regulation’s admission thresholds are highly unfavorable for small/mid recycling factories — new “regeneration” whitelist enterprises require minimum registered capital of ¥50M, hazardous waste qualifications, and annual processing capacity >= 5,000 tonnes. Estimated 50-70% of small/mid recycling factories will exit the market by end of 2026, with the top 10 enterprises’ market share rising from 60% to 85%+.

3. Compliance Path Recommendations

3.1 End-of-Life Battery Holders (4-Step Compliance Method)

  1. Establish end-of-life battery ledger: quantity, model, chemistry, SOH evaluation
  2. Select whitelisted downstream processor: Verify qualifications on MIIT public page
  3. Sign compliant processing agreement: Clarify responsibility division (transfer / shared liability)
  4. Retain complete transfer manifests: As internal audit and regulatory inspection evidence

3.2 Storage Integrators / PACK Factories (Reuse Scenarios)

  • Prioritize Grade A cells (SOH 80%+, complete chemistry, traceable factory data)
  • Per-batch testing: National standard corresponding test reports
  • Clear labeling: Product nameplate + manual labeled “Reused Product”

3.3 Vehicle OEMs / Battery Manufacturers

  • Full Battery Passport system launch (QR code from factory)
  • Sign long-term agreements with >= 3 whitelisted recycling factories
  • Annual public end-of-life battery flow report (CSR disclosure requirement)

4. 2026 H2 Industry Outlook

Short-term (Q3-Q4): Small/mid recycling factories concentrated exit, black mass supply temporarily tight, black mass prices projected to rise 10-15%.

Mid-term (2027): New national standard reused product market matures, projected to form ¥20-30 billion scale (per China Electronic Energy Saving Technology Association forecast).

Long-term (2028-2030): Battery Passport national networking + carbon footprint linked to CBAM, batteries exported to EU must disclose recovered material content — this will reverse-promote domestic recycling system standardization.

5. Industry Resources

  • MIIT public page: Query compliant whitelist enterprises
  • CIRs / GEM / Brunp Recycling: Head compliant recycling factories
  • dididede: Lithium battery trading + end-of-life battery quality grading services; contact us for compliant downstream connections

For broader context on China lithium battery industry, see how to choose a China lithium battery supplier or the LFP vs NMC chemistry comparison.

Frequently Asked Questions

What changed in lithium battery recycling policy in 2026?
Effective August 2026, the MIIT Announcement No. 20 updated recycling classifications: the “cascading utilization” concept was retired, and only “regeneration” is now a recognized category. The “regeneration” whitelist now contains ~120 companies (down from the combined ~280 before the policy update).

Which lithium battery types are still recyclable under the new policy?
LFP (lithium iron phosphate) and NMC (nickel manganese cobalt) batteries used in EVs and energy storage are still eligible for regeneration. NCA (lithium cobalt aluminum) batteries follow the same requirements as NMC. LMO (lithium manganese oxide) and LTO (lithium titanate) batteries have separate, more limited recycling pathways.

Do I need a recycling permit to sell lithium batteries to China?
Exporters shipping lithium batteries to China do not need a recycling permit — only Chinese producers and importers do. However, your Chinese customers will require you to provide SDS (Safety Data Sheet), UN 38.3 transportation certification, and product carbon footprint documentation. We can help.


Related reading: EU Battery Regulation 2026 · China Lithium Battery Export Data H1 2026 · Lithium Battery Export Essentials: UN 38.3 + MSDS

Newsletter Updates

Enter your email address below and subscribe to our newsletter